PCV Valve - Buick V6 - 4x4Wire TrailTalk

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: PCV Valve - Buick V6 [Re: gerry_p] #898897 08/05/08 06:29 AM

Joined: Sep 2005

Posts: 1,087

Southeast Michigan

BobRowe

Body Damage is Cool

Have you checked the vacuum line going to the PCV valve to insure that it isn't clogged?

1977 CJ-7, fiberglass body, AMC 360 w/ headers, DUI ignition, Edelbrock intake and Holley 4150 carb, TF999, Dana 300, 4.56 gears lockers, York air comp, 4" susp lift, 2" body lift, BFG 35" M-T tires, Megashifter, AGR pump & box, REP8000 winch.

Entire Thread
Subject	Posted By	Posted
PCV Valve - Buick V6	gerry_p	08/05/08 04:37 AM
Re: PCV Valve - Buick V6	BobRowe	08/05/08 06:29 AM
Re: PCV Valve - Buick V6	BigJim	08/05/08 07:42 PM
Re: PCV Valve - Buick V6	gerry_p	08/24/08 03:42 AM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.478s Queries: 16 (3.476s) Memory: 0.5977 MB (Peak: 0.6306 MB) Data Comp: Off Server Time: 2026-06-12 17:11:07 UTC
Valid HTML 5 and Valid CSS