22r Rebuild Machining Costs

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 22r Rebuild Machining Costs [Re: Ghostrider] #900033 08/13/08 08:14 AM

Joined: May 2008

Posts: 14

near Redding CA

anotherjeff Offline

Need a Spot

Specifically, WHY are you "rebuilding" your 22R?

Typically, only the timing chain and head (valves) require attention on tired 22R's.

My personal solution to high prices for machine shop work is to avoid it! A good used OEM head (~$60) can be installed without machine work.

Entire Thread
Subject	Posted By	Posted
22r Rebuild Machining Costs	Ghostrider	08/12/08 01:58 AM
Re: 22r Rebuild Machining Costs	OOP'S	08/12/08 02:52 AM
Re: 22r Rebuild Machining Costs	SantaCruz4Runner	08/12/08 12:51 PM
Re: 22r Rebuild Machining Costs	Sixxgun	08/13/08 01:41 AM
Re: 22r Rebuild Machining Costs	engnbldr	08/19/08 05:46 PM
Re: 22r Rebuild Machining Costs	kewlynx	08/13/08 04:19 AM
Re: 22r Rebuild Machining Costs	anotherjeff	08/13/08 08:14 AM
Re: 22r Rebuild Machining Costs	kewlynx	08/13/08 08:25 AM
Re: 22r Rebuild Machining Costs	Red_Chili	08/19/08 03:41 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.651s Queries: 16 (3.649s) Memory: 0.6087 MB (Peak: 0.6417 MB) Data Comp: Off Server Time: 2026-06-16 01:15:36 UTC
Valid HTML 5 and Valid CSS