Rust - 4x4Wire TrailTalk

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rust [Re: eleet] #900426 08/16/08 02:13 AM

Joined: Apr 2003

Posts: 26

York, PA

yorkt

Getting the Wheeling Fever

Thanks for all of the info. Since the paint is bubbling I am not sure what I will find underneath it. From what I am seeing, it looks like the wheel well sheet metal is bent along with the exterior bed sheet metal to form a lip. There is rust where the two are together and I am assuming moisture is getting in between there. I am planning to get the materials and start on it Labor day weekend.

Entire Thread
Subject	Posted By	Posted
Rust	yorkt	08/14/08 02:51 PM
Re: Rust	garym	08/15/08 02:59 AM
Re: Rust	wsquaredodie	08/15/08 02:31 PM
Re: Rust	eleet	08/15/08 11:07 PM
Re: Rust	yorkt	08/16/08 02:13 AM
Re: Rust	CJM	08/16/08 04:41 AM
Re: Rust	eleet	08/16/08 11:38 PM
Re: Rust	yorkt	09/01/08 03:21 PM
Re: Rust	eleet	09/02/08 12:05 AM
Re: Rust	yorkt	09/02/08 09:33 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.879s Queries: 16 (3.877s) Memory: 0.6102 MB (Peak: 0.6432 MB) Data Comp: Off Server Time: 2026-06-16 18:52:02 UTC
Valid HTML 5 and Valid CSS