trouble with 3 in suspension lift

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: trouble with 3 in suspension lift [Re: kmattinson] #901646 08/23/08 03:24 PM

Joined: May 2008

Posts: 30

Logan, Utah

kmattinson Offline

Getting the Wheeling Fever

Yah i do have a two piece drive shaft. But it is an automatic so i dont have a clutch. thanks for that article on carrier bearings. Cause i am pretty sure thats what it is. So i will try that and if that doesnt work i will live with it until i get a one peice. thanks

Entire Thread
Subject	Posted By	Posted
trouble with 3 in suspension lift	kmattinson	08/22/08 11:49 AM
Re: trouble with 3 in suspension lift	BigSwede	08/22/08 03:48 PM
Re: trouble with 3 in suspension lift	Van	08/22/08 05:47 PM
Re: trouble with 3 in suspension lift	Gizzy42	08/23/08 12:37 AM
Re: trouble with 3 in suspension lift	kmattinson	08/23/08 03:24 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.197s Queries: 16 (4.195s) Memory: 0.6009 MB (Peak: 0.6339 MB) Data Comp: Off Server Time: 2026-07-13 09:14:53 UTC
Valid HTML 5 and Valid CSS