1st Gen SR5 Seats

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 1st Gen SR5 Seats [Re: toyrunner] #902324 08/27/08 04:56 PM

Joined: Feb 2001

Posts: 3,935

Minnesota

bkg

Roll Me Over

Seat rails are the same. I've never seen a difference. I suspect something wrong with the locking mechanism. It's really not that hard to swap rails, if you need to do so. Done it a few times for 4Runner to Truck installs.

Brian K. Gallus
I have nothing important to say.

Entire Thread
Subject	Posted By	Posted
1st Gen SR5 Seats	Zolton	08/26/08 07:13 PM
Re: 1st Gen SR5 Seats	Richards19884x4	08/27/08 03:21 AM
Re: 1st Gen SR5 Seats	toyrunner	08/27/08 09:16 AM
Re: 1st Gen SR5 Seats	bkg	08/27/08 04:56 PM
Re: 1st Gen SR5 Seats	DRTDEVL	08/28/08 10:33 AM
Re: 1st Gen SR5 Seats	Greg_Canada	09/03/08 04:04 AM
Re: 1st Gen SR5 Seats	MisterZee	09/13/08 01:49 PM
Re: 1st Gen SR5 Seats	qdude79	09/16/08 07:34 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.435s Queries: 16 (3.433s) Memory: 0.6053 MB (Peak: 0.6383 MB) Data Comp: Off Server Time: 2026-05-30 09:14:43 UTC
Valid HTML 5 and Valid CSS