valve's man, valves

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

valve's man, valves #902995 08/29/08 08:58 PM

Joined: Aug 2008

Posts: 25

Tennessee

Knucklepin Offline

Getting the Wheeling Fever

I've decided to go with a 261c cam and engine kit for my 22r. My question is this: Are there any special tricks or tolerances to be followed when adjusting the valves on this cam or do I just follow my repair manual instructions? <img src="/forums/images/graemlins/confused.gif" alt="" />

If a man throws a wrench and no one is there to see it; does it still count as pitching a fit?

Entire Thread
Subject	Posted By	Posted
valve's man, valves	Knucklepin	08/29/08 08:58 PM
Re: valve's man, valves	Staceman	08/29/08 09:06 PM
Re: valve's man, valves	engnbldr	08/29/08 10:27 PM
Re: valve's man, valves	kewlynx	08/30/08 02:11 AM
Re: valve's man, valves	Knucklepin	08/30/08 04:06 AM
Re: valve's man, valves	engnbldr	08/30/08 06:00 AM
Re: valve's man, valves	Knucklepin	08/30/08 07:10 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.376s Queries: 15 (3.374s) Memory: 0.6031 MB (Peak: 0.6361 MB) Data Comp: Off Server Time: 2026-05-27 18:13:41 UTC
Valid HTML 5 and Valid CSS