Pulled the transmission and transfer case from my donor yesterday and found a couple of things I'm not sure of.
Number 1 is this shaft sticking out of the passenger side of the trans. I know its the the far side of the gear selector shaft, but is something missing here? Why the seal if nothing goes in there and obviously it wasn't leaking? (sorry for the fuzzy pic)

Then there is this mount on the side of the transfer case which is definately not in the best of shape. I'm sure its some kind of torque limiter to prevent torque reaction in the drivetrain. The FSM refers to it as "Transfer mounting bracket" in the A/T removal section, but I can't find the part in WinCaps or on any parts website. Searched the part number archive here with no luck. Not sure what's missing there (bearing, bushing, etc) but quick look says I should be able to find a bushing to fill the gap? Or maybe fab up something similar to a swaybar end link? Unless of course someone has a P/N and its still available. <img src="/forums/images/graemlins/rolleyes.gif" alt="" />