Bumpstop clearance

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Bumpstop clearance [Re: XLBar] #903925 09/13/08 03:02 AM

Joined: Feb 2008

Posts: 39

T100_4x4

Getting the Wheeling Fever

i think it might have a little to do with your torsion bars too. 3/4 of an inch seems a little tight but if you dont hit them when ur going over a speed bump i guess ur alright. if u wanna find out if ur hitting get a little grease and put it on ur bump stop and if there ends up being a smudge on ur control arm u might wanna crank up ur torsion bars a couple of turns.

Entire Thread
Subject	Posted By	Posted
Bumpstop clearance	XLBar	09/03/08 08:27 PM
Re: Bumpstop clearance	4xGeek	09/03/08 11:16 PM
Re: Bumpstop clearance	T100_4x4	09/08/08 04:09 AM
Re: Bumpstop clearance	XLBar	09/08/08 07:24 PM
Re: Bumpstop clearance	T100_4x4	09/13/08 03:02 AM
Re: Bumpstop clearance	adam	09/13/08 04:16 AM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.589s Queries: 16 (3.587s) Memory: 0.6034 MB (Peak: 0.6364 MB) Data Comp: Off Server Time: 2026-06-22 21:05:45 UTC
Valid HTML 5 and Valid CSS