POR-15 and NEW bed ......

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: POR-15 and NEW bed ...... [Re: CJM] #904115 09/10/08 03:18 PM

Joined: Aug 2001

Posts: 5,986

Littleton, CO

Red_Chili

Toyota Section Staffer

In my experience, POR15 without metal prep (and sometimes even WITH metal prep, if not done precisely) including their three step process doesn't adhere very well. Peels off in fact. One of the downers of POR15. How did you get all that done on the inside?

-Bill
'87 4Runner w/ '96 5VZ-FE, 'Red Chili II'
'97 Taco XtraCab 3RZ-FE, 'BlackBean'
TLCA # 13257, Rising Sun 4x4 Club Land Use Coordinator
"He who stops being better stops being good." -Oliver Cromwell

Entire Thread
Subject	Posted By	Posted
POR-15 and NEW bed ......	CJM	09/05/08 02:33 AM
Re: POR-15 and NEW bed ......	kewlynx	09/05/08 02:55 AM
Re: POR-15 and NEW bed ......	CJM	09/05/08 04:11 AM
Re: POR-15 and NEW bed ......	CJM	09/06/08 01:27 AM
Re: POR-15 and NEW bed ......	Toy4x	09/08/08 05:12 AM
Re: POR-15 and NEW bed ......	CJM	09/09/08 01:59 AM
Re: POR-15 and NEW bed ......	CJM	09/09/08 01:59 AM
Re: POR-15 and NEW bed ......	Red_Chili	09/09/08 03:40 PM
Re: POR-15 and NEW bed ......	bkg	09/09/08 05:07 PM
Re: POR-15 and NEW bed ......	philly	09/09/08 11:17 PM
Re: POR-15 and NEW bed ......	CJM	09/10/08 01:35 AM
Re: POR-15 and NEW bed ......	Red_Chili	09/10/08 03:18 PM
Re: POR-15 and NEW bed ......	CJM	09/10/08 03:48 PM
Re: POR-15 and NEW bed ......	CJM	09/11/08 02:10 AM
Re: POR-15 and NEW bed ......	Toy4x	09/15/08 04:09 PM
Re: POR-15 and NEW bed ......	CJM	09/16/08 02:11 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: