Canadian Compliance for 2.8 Pajero 1993

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Canadian Compliance for 2.8 Pajero 1993 #904363 09/07/08 04:17 AM

Joined: Aug 2008

Posts: 11

Canada

watson

Need a Spot

Hi out there Iam in the process of looking for 2.8 Pajero , I think I've found one.Can any one help with DRL issues with regards to whether one should use a module or use the lower portion of the turn signal lens bulbs? I've been told they are for a higher intentsity flashing mode.I believe you disconect that feature and find a ignition key point, does this sound right?
Thanks for any help!!

Entire Thread
Subject	Posted By	Posted
Canadian Compliance for 2.8 Pajero 1993	watson	09/07/08 04:17 AM
Re: Canadian Compliance for 2.8 Pajero 1993	redbull	09/07/08 07:07 AM
Re: Canadian Compliance for 2.8 Pajero 1993	PartyTruck	09/08/08 08:29 PM
Re: Canadian Compliance for 2.8 Pajero 1993	redbull	09/08/08 09:03 PM
Re: Canadian Compliance for 2.8 Pajero 1993	PartyTruck	09/08/08 09:24 PM
Re: Canadian Compliance for 2.8 Pajero 1993	torquemonster	09/09/08 07:04 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.496s Queries: 15 (3.494s) Memory: 0.6035 MB (Peak: 0.6365 MB) Data Comp: Off Server Time: 2026-06-10 06:22:41 UTC
Valid HTML 5 and Valid CSS