3rd Row in Gen 1

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 3rd Row in Gen 1 [Re: 52degrees] #904514 09/08/08 12:55 AM

Joined: May 2007

Posts: 4,628

Buford, Georgia

hazy_daze

Roll Me Over

Quote

Did you use existing hole in the floor or did you drill new holes?

I only used the far-forward bolt holes on the forward cargo loop thingees. Otherwise, all the holes are new. I used a combination of high-strength bolts and washers to complete the job.

Looks like he used mostly new holes. Cool <img src="/forums/images/graemlins/butwiggle.gif" alt="" /> install. Real clean too. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Fasteddy's advice is occasionally sound...

Entire Thread
Subject	Posted By	Posted
3rd Row in Gen 1	blinkerbox	09/07/08 09:10 PM
Re: 3rd Row in Gen 1	MontyMcV	09/07/08 09:27 PM
Re: 3rd Row in Gen 1	WagonMaster	09/07/08 11:03 PM
Re: 3rd Row in Gen 1	TXrazor	09/07/08 11:33 PM
Re: 3rd Row in Gen 1	52degrees	09/07/08 11:42 PM
Re: 3rd Row in Gen 1	hazy_daze	09/08/08 12:55 AM
Re: 3rd Row in Gen 1	blinkerbox	09/08/08 02:56 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.498s Queries: 16 (3.496s) Memory: 0.6067 MB (Peak: 0.6396 MB) Data Comp: Off Server Time: 2026-06-17 11:15:47 UTC
Valid HTML 5 and Valid CSS