Rear differential pinion seal

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Rear differential pinion seal [Re: joe_hockey] #904547 09/08/08 02:59 AM

Joined: Mar 2008

Posts: 6

Kalifornia

SantaCruz4Runner Offline

Need a Spot

It would be a good idea. If there is a crush sleeve then there is the possibility of adding more preload, by the turn of a nut..

1986 4Runner SAS 4.3/700R4/4.7/4.88 and some stuff

Entire Thread
Subject	Posted By	Posted
Rear differential pinion seal	joe_hockey	09/08/08 01:55 AM
Re: Rear differential pinion seal	SantaCruz4Runner	09/08/08 02:59 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.588s Queries: 16 (3.586s) Memory: 0.5940 MB (Peak: 0.6270 MB) Data Comp: Off Server Time: 2026-06-15 08:15:03 UTC
Valid HTML 5 and Valid CSS