Front Diff Locker Question for Gen III Montero

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Front Diff Locker Question for Gen III Montero [Re: DirtDriver] #906274 09/20/08 04:24 PM

Joined: Apr 2000

Posts: 1,664

Portland, OR

Alex Kogan Offline

Body Damage is Cool

Gen 3 front is pretty much identical to Gen2 except wheel hub flanges. Wheeling would expose exactly same week points = not much.You can't put axle hubs on it.

92 SR, 285/75R16 Yoko MT ARB locker GAST compressor AirLift 1000 MM10500 Snorkel custom rear bumper
02 Montero LS died protecting the master
08 PowerWagon (stock!)

Entire Thread
Subject	Posted By	Posted
Front Diff Locker Question for Gen III Montero	TXMontero	09/19/08 04:55 PM
Re: Front Diff Locker Question for Gen III Montero	TXrazor	09/19/08 07:05 PM
Re: Front Diff Locker Question for Gen III Montero	TXMontero	09/19/08 07:47 PM
Re: Front Diff Locker Question for Gen III Montero	Ian Sharpe	09/19/08 10:35 PM
Re: Front Diff Locker Question for Gen III Montero	DirtDriver	09/20/08 05:49 AM
Re: Front Diff Locker Question for Gen III Montero	Alex Kogan	09/20/08 04:24 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.986s Queries: 16 (3.984s) Memory: 0.6041 MB (Peak: 0.6371 MB) Data Comp: Off Server Time: 2026-06-03 04:42:35 UTC
Valid HTML 5 and Valid CSS