Help getting my Tach to work

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Help getting my Tach to work #906318 09/19/08 11:01 PM

Joined: Apr 2007

Posts: 73

Seattle, Wa

PLammer

Getting the Wheeling Fever

So, as I expect everyone has seen from my previous posts, I've transplanted a '94 4JG2 into a '91 trooper. I need a way to interface the electronic tach sensor that is on the motor to my original tach. I can't be so lucky as to just be able to connect the wires. Is there some trick to doing this?

Thanks!
Paul

Entire Thread
Subject	Posted By	Posted
Help getting my Tach to work	PLammer	09/19/08 11:01 PM
Re: Help getting my Tach to work	marzini	09/20/08 03:57 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.562s Queries: 15 (3.554s) Memory: 0.5942 MB (Peak: 0.6272 MB) Data Comp: Off Server Time: 2026-06-07 01:49:54 UTC
Valid HTML 5 and Valid CSS