alternator pulley nut removal %^&^&**($#

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

alternator pulley nut removal %^&^&**($# #906603 09/21/08 07:59 PM

Joined: Aug 2003

Posts: 480

Lower Hudson Valley, New York

MAC

Mudrunner

My buddy can't get the pulley nut off his alternator (1995) so he can replace the bearings. He has it clamped in a 3 jaw chuck and a long breaker bar and still no go. Anyone ever been there?

Entire Thread
Subject	Posted By	Posted
alternator pulley nut removal %^&^&**($#	MAC	09/21/08 07:59 PM
Re: alternator pulley nut removal %^&^&**($#	ErikB	09/22/08 04:17 PM
Re: alternator pulley nut removal %^&^&**($#	Richards19884x4	09/22/08 05:21 PM
Re: alternator pulley nut removal %^&^&**($#	MAC	09/23/08 01:31 PM
Re: alternator pulley nut removal %^&^&**($#	PCMentor	09/27/08 12:05 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 6.006s Queries: 15 (3.446s) Memory: 0.6007 MB (Peak: 0.6336 MB) Data Comp: Off Server Time: 2026-05-30 02:20:11 UTC
Valid HTML 5 and Valid CSS