Sorry for no response, been a long week/post weekend. I pulled the ignition wire off the starter, cleaned it well, crimped it (after disconnecting of course <img src="/forums/images/graemlins/smile.gif" alt="" />) and as soon as I turned the key: click! So one simple solution ruled out. Next I'll check the ground wire (new, but maybe I didn't clean off the connection well enough), if that doesn't yeild any results I'll be testing the voltage coming from the ignition switch (as soon as I can get my other two hands to give me a hand). I'll probobly also just run a test jumper to see if that may be my problem. If all else fails I suppose I'll be pulling the starter out, which is sort of what I suspected but have been ignoring so far. Thanks for all the input everyone, helps out a lot.