Quote
When I connect a ground to the frame, am I going to have to tap and drill a hole or are there some natural points up front for this.


If you don't factory threaded holes in to use, or have access to a welder, drill and tap or drill and use a rivet, or you could use a self tapping bolt. It doesn't have to be a large bolt, I used a 1/8" screw a few years back and it worked fine until I had to add a few more ground wires to it, then I just welded a bolt to the frame.

More than tread lightly. Leave it like you were never there, nor anyone else.
'90 X-cab 4.88's 33 BFG AT's, rr ARB, Headers, Ignition upgrade, cold air induction.
'91 X-cab 5.29's 315's BFG MT's, rr ARB, custom bumper and flatbed