2" wire reinforced fuel hose. P/N 1045 at NAPA. The smaller one is a ~3/4". I used a multi duty hose from NAPA as well. On the large hose, you'll need to cut the anti-chafe liner to get it to spread around the new hose. It's a slightly larger diameter than the old hose. It's flexy enough to make the bends. Good luck <img src="/forums/images/graemlins/kewl.gif" alt="" />

EDIT: Gave ya the wrong P/N. For the reinforced hose it's an 1130. Sorry.

Last edited by hazy_daze; 09/29/08 08:00 PM.
Fasteddy's advice is occasionally sound...