Power steering bracket for 304 / HEI distributor interference

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Power steering bracket for 304 / HEI distributor interference [Re: RCCMAN] #909344 10/11/08 10:37 PM

Joined: Sep 2005

Posts: 1,087

Southeast Michigan

BobRowe

Body Damage is Cool

I have a D.U.I HEI distributor on my AMC 360 and it doesn't interfere with the power steering pump. Try the previous suggestion of a longer belt

1977 CJ-7, fiberglass body, AMC 360 w/ headers, DUI ignition, Edelbrock intake and Holley 4150 carb, TF999, Dana 300, 4.56 gears lockers, York air comp, 4" susp lift, 2" body lift, BFG 35" M-T tires, Megashifter, AGR pump & box, REP8000 winch.

Entire Thread
Subject	Posted By	Posted
Power steering bracket for 304 / HEI distributor interference	RCCMAN	10/09/08 03:20 PM
Re: Power steering bracket for 304 / HEI distributor interference	rixcj	10/11/08 01:04 AM
Re: Power steering bracket for 304 / HEI distributor interference	BobRowe	10/11/08 10:37 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.808s Queries: 16 (4.806s) Memory: 0.5960 MB (Peak: 0.6289 MB) Data Comp: Off Server Time: 2026-06-12 21:24:55 UTC
Valid HTML 5 and Valid CSS