Quote
didnt frankr do an experiment with the genI lwb coils in his swb and get net 2" lift in the rear (the same as putting genII coils in a genI lwb)?


Yes - you and joehope sent me the various Gen1 LWB coils - thanks again! They work fine for about 1.75" of lift..... and no issues with the coils dropping out as with some cases of Gen2 coils installed in a Gen1 SWB.

After any of these coil lifts, it's wise to check for propshaft vibration since there's a difference in spline engagement length at the tailshaft.

Thread

Frank

'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum