exhaust on 22re motor

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: exhaust on 22re motor [Re: Anthony_89] #909413 10/10/08 07:46 PM

Joined: Apr 2008

Posts: 16

Fresno, CA

qdude79

Need a Spot

Just had a new system installed. Stock header, 2" to the new cat. 2.25" to the new Flowmaster Delta 50 and 2.25" to the back. All stock routing. Sounds good without being too loud or "ricey." Wanted it to hint at "not stock" without trying to be a big block. I think I accomplished that.

"The only true wisdom consists in knowing that you know nothing."

Entire Thread
Subject	Posted By	Posted
exhaust on 22re motor	Anthony_89	10/09/08 11:35 PM
Re: exhaust on 22re motor	4Crawler	10/09/08 11:41 PM
Re: exhaust on 22re motor	Anthony_89	10/09/08 11:44 PM
Re: exhaust on 22re motor	4Crawler	10/09/08 11:46 PM
Re: exhaust on 22re motor	Anthony_89	10/09/08 11:49 PM
Re: exhaust on 22re motor	qdude79	10/10/08 07:46 PM
Re: exhaust on 22re motor	matts	10/11/08 03:16 AM
Re: exhaust on 22re motor	suba	10/28/08 04:31 AM
Re: exhaust on 22re motor	Snowtoy	10/10/08 09:50 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.421s Queries: 16 (3.419s) Memory: 0.6099 MB (Peak: 0.6429 MB) Data Comp: Off Server Time: 2026-05-27 11:08:09 UTC
Valid HTML 5 and Valid CSS