1992 TRooper

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 1992 TRooper [Re: legbone] #909450 10/10/08 07:31 AM

Joined: Oct 2007

Posts: 16

jbh1989

Need a Spot

Are you bench-bleeding the master cylinder before installing?

Are you using NEW or REBUILT parts? Or, are you rebuilding them yourself? Are all the fittings tight? They may hold under pressure but leak air under vacuum (though not likely, it is a possibility)

John H.
1991 Isuzu Trooper 2.6
2004 Toyota Sequoia SR5 4x2

Entire Thread
Subject	Posted By	Posted
1992 TRooper	legbone	10/10/08 03:00 AM
Re: 1992 TRooper	jbh1989	10/10/08 07:31 AM
Re: 1992 TRooper	legbone	10/10/08 11:59 AM
Re: 1992 TRooper	mlclark	10/10/08 11:23 PM
Re: 1992 TRooper	legbone	10/11/08 05:14 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.506s Queries: 16 (3.503s) Memory: 0.5995 MB (Peak: 0.6325 MB) Data Comp: Off Server Time: 2026-06-08 02:48:28 UTC
Valid HTML 5 and Valid CSS