Used engine frshen up?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Used engine frshen up? [Re: OFFRD88] #910918 10/15/08 04:45 PM

Joined: Jun 2007

Posts: 28

San Diego, CA

OFFRD88

Getting the Wheeling Fever

I'm swapping the head and all the peripherals from my current motor, so things like the HG and timing chain components will be from the "almost new spun bearing" motor. How could I do the compression test without a starter? The head was tested recently so I know the valves are good.

Thanks guys,

Dave A.
88 P/U lots of mods
95 4Runner on 33's with a Detroit
Couple of mountain bike's rolling on 26's.

Entire Thread
Subject	Posted By	Posted
Used engine frshen up?	OFFRD88	10/15/08 12:57 AM
Re: Used engine frshen up?	kewlynx	10/15/08 01:37 AM
Re: Used engine frshen up?	94krawler	10/15/08 05:22 AM
Re: Used engine frshen up?	OFFRD88	10/15/08 04:45 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.469s Queries: 16 (3.467s) Memory: 0.5984 MB (Peak: 0.6314 MB) Data Comp: Off Server Time: 2026-06-16 07:26:42 UTC
Valid HTML 5 and Valid CSS