|
|
|
|
 Re: Gen 1 V6 V5MT1 Bellhousing swap
[Re: yankneck696]
#911512
10/22/08 10:55 PM
|
Joined: Sep 2006
Posts: 2,712
Roll Me Over
|
I have an AutoCad drawing of the mounting face that I drew a number of years ago that is hiding somewhere. I will get the other measurements to you soon.
Cheers, Charlie
If It ain't broke, Modify it!
87 Montero turbo Converted back in Spring1989
95 Montero SR 3.8 DOHC Only one?
93 Pajero 3 door 6G75 Mivec with paddle shifted 5 speed
Then a Gen2 SR with full coil independent suspension.
|
|
|
Re: Gen 1 V6 V5MT1 Bellhousing swap
[Re: OldColt]
#911513
10/23/08 12:11 AM
|
Joined: Sep 2006
Posts: 406
OP
Mudrunner
|
Sweet !!!
I thank you greatly.
With the autocad, how would I view it?
Ed
Yankneck = Yankee ingenuity with Redneck stupidity.
"How can I break it better?"
89 Raider 3.0 w/ 31's for now
|
|
|
Re: Gen 1 V6 V5MT1 Bellhousing swap
[Re: yankneck696]
#911514
10/23/08 01:12 AM
|
Joined: Jan 2001
Posts: 13,649
Web Wheeler
|
Download a freeware .dwg viewer.
Not responsible for advice not taken...
|
|
|
Re: Gen 1 V6 V5MT1 Bellhousing swap
[Re: fasteddy]
#911515
10/23/08 11:13 AM
|
Joined: Sep 2006
Posts: 406
OP
Mudrunner
|
|
Yankneck = Yankee ingenuity with Redneck stupidity.
"How can I break it better?"
89 Raider 3.0 w/ 31's for now
|
|
|
Re: Gen 1 V6 V5MT1 Bellhousing swap
[Re: yankneck696]
#911516
10/23/08 01:09 PM
|
Joined: Sep 2006
Posts: 2,712
Roll Me Over
|
The bell is 7" tall.
It does not have a simple bore in it as an American bellhousing does. This one is the front of the gearbox so it is machined as the bearing retainer for both shafts and has the TO bearing guide tube integral to the casting.
My drawing of the mounting face is still hiding.
Cheers, Charlie
If It ain't broke, Modify it!
87 Montero turbo Converted back in Spring1989
95 Montero SR 3.8 DOHC Only one?
93 Pajero 3 door 6G75 Mivec with paddle shifted 5 speed
Then a Gen2 SR with full coil independent suspension.
|
|
|
Re: Gen 1 V6 V5MT1 Bellhousing swap
[Re: OldColt]
#911517
10/23/08 10:44 PM
|
Joined: Sep 2006
Posts: 406
OP
Mudrunner
|
Well, if it's the bearing retainer, I guess it's out of the question... I do have a friend with a Yota setup I can get & can swap out alot of bells with that, or just use tha Isuzu setup...\
Thanks alot...
Ed
Yankneck = Yankee ingenuity with Redneck stupidity.
"How can I break it better?"
89 Raider 3.0 w/ 31's for now
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 2.642s Queries: 16 (0.004s) Memory: 0.6170 MB (Peak: 0.7025 MB) Data Comp: Off Server Time: 2026-06-06 07:34:11 UTCValid HTML 5 and Valid CSS 
