258 burnt valve

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 258 burnt valve [Re: jstritec] #911789 10/21/08 04:02 AM

Joined: Oct 2003

Posts: 7,768

Central Texas

BigJim

Web Wheeler

Sure that'll work finr.. I betcha 99% of all head millings are useless. A slightly warped head was warped when it was ON THE ENGINE! It gave no problems then and when reinstalled it will torque down tight again.
Big Jim <img src="/forums/images/graemlins/pfft.gif" alt="" />

professional bovine relocation specialist

Entire Thread
Subject	Posted By	Posted
258 burnt valve	jstritec	10/20/08 08:47 PM
Re: 258 burnt valve	BigJim	10/21/08 04:02 AM
Re: 258 burnt valve	jstritec	10/21/08 03:51 PM
Re: 258 burnt valve	BigJim	10/21/08 04:09 PM
Re: 258 burnt valve	jstritec	10/21/08 06:46 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.545s Queries: 16 (3.542s) Memory: 0.5991 MB (Peak: 0.6321 MB) Data Comp: Off Server Time: 2026-06-01 22:13:53 UTC
Valid HTML 5 and Valid CSS