SM465 in a 87 YJ

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

SM465 in a 87 YJ #912034 10/22/08 03:47 PM

Joined: Aug 2007

Posts: 10

Marquette MI

SkibumMt20 Offline

Need a Spot

I picked up a SM465 from a 1990 Chevy 3/4 ton. I was wondering if anyone knew if the slave from the SM465 would work master from my 87 YJ. Does anyone know the bore size or displacement of the master cylinder from the YJ and chev? One out of 3 part store computes said they were the same but that isnt enough

89 YJ DD

87 YJ 350 TBI, SM465, NP241(eh), SOA w/1.5" springs, 35" MTR, D44 (aussi locker)/14bolt (welded) with 4.88's

Location: Upper Michigan

Entire Thread
Subject	Posted By	Posted
SM465 in a 87 YJ	SkibumMt20	10/22/08 03:47 PM
Re: SM465 in a 87 YJ	BigJim	10/22/08 04:30 PM
Re: SM465 in a 87 YJ	SkibumMt20	10/22/08 04:41 PM
Re: SM465 in a 87 YJ	SkibumMt20	10/23/08 04:04 PM
Re: SM465 in a 87 YJ	BigJim	10/23/08 05:00 PM
Re: SM465 in a 87 YJ	SkibumMt20	10/27/08 05:59 PM

Moderated by 4x4Wire

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.556s Queries: 15 (3.554s) Memory: 0.6025 MB (Peak: 0.6354 MB) Data Comp: Off Server Time: 2026-06-20 09:46:52 UTC
Valid HTML 5 and Valid CSS