Front Axle Truss

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Front Axle Truss #912543 10/24/08 07:55 PM

Joined: Aug 2004

Posts: 271

Washington State

Buck

Mudrunner

I made a Front Axle Truss and had some questions about welding it on. Should I remove the axles and drain it before welding the truss on? Or could it just be welded on just taking care to do small welds and letting it cool inbetween? I was thinking the latter since it is subjected to heat during normal operation anyways.

Thanks

84 Ext. Cab Pickup.

Entire Thread
Subject	Posted By	Posted
Front Axle Truss	Buck	10/24/08 07:55 PM
Re: Front Axle Truss	Buck	10/27/08 04:41 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.492s Queries: 15 (3.490s) Memory: 0.5939 MB (Peak: 0.6269 MB) Data Comp: Off Server Time: 2026-06-09 09:36:21 UTC
Valid HTML 5 and Valid CSS