|
|
|
|
 u bolts
#913324
10/29/08 03:30 PM
|
Joined: Feb 2003
Posts: 91
OP
Getting the Wheeling Fever
|
Guys I need a pair of U Bolts for 5 inch lift springs on the rear of an 85 runner. All I can seem to find is the rounded ones and I need the squared off ones. Any ideas on where to find them? .....Thanks.....Brian
|
|
|
Re: u bolts
[Re: 4runnermedic]
#913325
10/30/08 12:12 AM
|
Joined: Jan 2001
Posts: 11,595
Forum Moderator
|
In the "help" section of the auto parts stores? They have some different u-bolts.
If all else fails, theres a place here that bends up custom ubolts. Maybe they will ship to you? Its called Brighton Spring.
|
|
|
Re: u bolts
[Re: 4runnermedic]
#913326
10/31/08 10:49 PM
|
Joined: Jul 2000
Posts: 2,125
Body Damage is Cool
|
Looks like there's two spring shops in your relative area. Either should be able to bend ubolts. Roanoke Auto Spring Works, Inc is right in Roanoke, and Salem Spring Works in (oddly enough) Salem. Trailer and heavy truck supply stores are another possible source. I see there's a Valley Heavy Duty Truck Alignment also in Roanoke that might be a place to try.
~Adam  96 T100: D44, lockers and stuff
|
|
|
Re: u bolts
[Re: adam]
#913327
11/01/08 06:20 PM
|
Joined: Feb 2003
Posts: 91
OP
Getting the Wheeling Fever
|
Tamendous....Thank you gentelmen
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.004s) Memory: 0.6007 MB (Peak: 0.6564 MB) Data Comp: Off Server Time: 2026-06-07 10:44:51 UTCValid HTML 5 and Valid CSS 
