Bought a dead Trooper about 2 years ago with good intentions. Pulled the engine at that time, just now putting it back together!
On the same wiring harness strand that goes to the starter I have the positive cable, one wire going to the solenoid, and an additional wire I don't yet know where it plugs in to. This wire has a square black plastic connector on it with a single flat cooper male blade contact inside. Any help where it plugs in to? Second wiring issue is on the passenger side of engine compartment. All wires accounted for except a flat, bare exposed connector with a single hole in it, this has several wires running in to it. I assume it's a ground that simply bolts to a stud? Help appreciated, need to get this thing out of the garage! Thanks