Caster angle is one thing that is hard to check with DIY tools, at least with IFS.
- http://www.cadvision.com/blanchas/54pontiac/alignment.html

Might be worth having an alignment shop give it a shot. On a solid axle, you can measure the spring perch or steering arm angle to get an idea of caster angle. Might see if you can find a spot to measure the angle on the steering control arms to get a relative angle between the two sides.

Last edited by 4Crawler; 11/02/08 06:13 PM.
r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code