Quote
The ones on my alloys are actually like the ones on the right in this picture. The cone portion matches pretty good with the steel wheel nut mount points

[Linked Image]


The alloy nuts should work on the steel then. I personally would only use them in an emergency. You might try putting a couple on a steel wheel and use acorns for the rest and drive around to see if they stay tight.

'04 Taco x-cab 3RZ FE stock (daily driver)
'90 x-cab 22RE stock
'82 Hilux 6" lift (ACES HI)
'82 2-Hiluxs' Rally Edition (parts)
'81 Hilux 3" lift (parts/restore)