Quote
I believe there was a thread showing what other wheels fit the Gen1's. This is for a 90 SWB Monte.

Looking to upsize but would rather find "take offs" from a matching pattern (Tacoma?). I think there were some bolt pattern matches but problems with the center hole sizing.

Does not have to be 15". Who's got the answer?


Funny you should mention that: Just last night I was doing some comparo's.

I don't know what size of wheels these are, or what size of tires came on them, but here's a list of wheels.

Bolt Pattern: 6 x 139.7
Stud Size: 12 x 1.5
Center Bore: 108mm
Offset: Low/Medium

Isuzu:
Amigo '89-'00; Axiom '02-up; Rodeo & Trooper '92-up

Lexus:
LX450 '96-'97

Honda:
Passport '94-'02


The following have a 12 x 1.25 Stud Size, which means getting a different pitch of lug nuts (any auto parts store).

Infinity:
QX4 '96-up



The following have a 106mm Bore, needing a 2mm boreout.

Toyota:
4-Runner '80-'95 & '00-up; Landcruiser '69-'97; Sequoia '01-up; T-100 '93-'96; Tacoma 4x4 '95-up; Tundra '99-up


The following have a 100mm Bore, needing an 8mm boreout.

Chevrolet:
Colorado/Canyon '04-up

Nissan:
Xterra '00-up; Frontier '98-up; Pathfinder '87-'04


Hope this helps.

Wagon Master

Last edited by WagonMaster; 11/13/08 04:53 AM.
HUMMER .25: No need to compensate.

1989 Dodge Raider: 3.0/5
1992 Chrysler LeBaron Convertible: 3.0/A
1994 GMC Safari: 4.3/A