98 Rodeo Transfer Case Drain/Fill Plug Torques?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 98 Rodeo Transfer Case Drain/Fill Plug Torques? [Re: Mr. Mojo] #915200 11/10/08 05:59 AM

Joined: Apr 2000

Posts: 7,268

Ventura County

mlclark

Isuzu Moderator

The easy answer is "as little as necessary". Remember, you are only crushing an o-ring, not a copper washer or tightening a tapered pipe thread. Too tight and they will pull the threads out of the case.

Michael

Entire Thread
Subject	Posted By	Posted
98 Rodeo Transfer Case Drain/Fill Plug Torques?	Mr. Mojo	11/09/08 10:09 PM
Re: 98 Rodeo Transfer Case Drain/Fill Plug Torques?	mlclark	11/10/08 05:59 AM
Re: 98 Rodeo Transfer Case Drain/Fill Plug Torques?	holger	11/15/08 10:12 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.484s Queries: 16 (3.482s) Memory: 0.5970 MB (Peak: 0.6300 MB) Data Comp: Off Server Time: 2026-06-04 17:55:48 UTC
Valid HTML 5 and Valid CSS