"bent" spring perch - 4x4Wire TrailTalk

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Axle housing diameter with respect to spring perch [Re: Chip] #915494 11/14/08 04:58 PM

Joined: Nov 2008

Posts: 63

Lafayette, CO

Chip

Getting the Wheeling Fever

I just measured the tube diameter under the spring perch and it's approx. 3.25". Is this right? I thought I saw 3.5" somewhere and was wondering about buying the proper perch.

Thanks in advance.

Chip

Entire Thread
Subject	Posted By	Posted
"bent" spring perch	Chip	11/11/08 04:27 PM
Re: "bent" spring perch	foxtrapper	11/12/08 03:47 PM
Re: "bent" spring perch	Chip	11/12/08 04:26 PM
Re: "bent" spring perch	wsquaredodie	11/12/08 09:32 PM
Re: "bent" spring perch	Chip	11/12/08 10:41 PM
Re: "bent" spring perch	wsquaredodie	11/12/08 11:50 PM
Re: "bent" spring perch	Chip	11/13/08 12:40 AM
Re: "bent" spring perch: figured out	Chip	11/13/08 06:10 AM
Re: "bent" spring perch: figured out	CJMT100	11/13/08 06:13 AM
Re: "bent" spring perch: figured out	Chip	11/13/08 06:28 AM
Re: "bent" spring perch: figured out	adam	11/13/08 07:34 AM
Re: "bent" spring perch: figured out	Chip	11/13/08 04:56 PM
Re: "bent" spring perch: figured out	adam	11/14/08 02:45 AM
Re: "bent" spring perch: figured out	Chip	11/14/08 03:27 PM
Re: "bent" spring perch: figured out	wsquaredodie	11/13/08 04:08 PM
Axle housing diameter with respect to spring perch	Chip	11/14/08 04:58 PM
Re: Axle housing diameter with respect to spring perch	wsquaredodie	11/18/08 04:01 PM
Re: Axle housing diameter with respect to spring perch	ErikB	11/18/08 04:27 PM
Re: Axle housing diameter with respect to spring perch	Chip	11/19/08 05:19 AM
Re: Axle housing diameter with respect to spring perch	adam	11/19/08 08:11 AM
Re: Axle housing diameter with respect to spring perch	Chip	11/19/08 04:01 PM
Re: Axle housing diameter with respect to spring perch	ErikB	11/19/08 04:22 PM
Re: Axle housing diameter with respect to spring perch	Chip	11/19/08 06:26 PM
Re: Axle housing diameter with respect to spring perch	Chip	11/21/08 06:40 AM
Re: "bent" spring perch	bkg	12/01/08 05:20 AM
Re: "bent" spring perch	Chip	12/01/08 06:08 AM
Re: "bent" spring perch	ErikB	12/01/08 05:18 PM
Re: "bent" spring perch	Chip	12/01/08 07:25 PM
Re: "bent" spring perch	ErikB	12/01/08 11:51 PM
Re: "bent" spring perch	adam	12/02/08 03:36 AM
Re: "bent" spring perch	Chip	12/02/08 03:50 PM
Re: "bent" spring perch	wsquaredodie	12/02/08 10:34 PM
Re: "bent" spring perch	Chip	12/03/08 06:24 AM
Re: "bent" spring perch	wsquaredodie	12/04/08 04:06 PM
Re: "bent" spring perch	Chip	12/05/08 06:09 AM
Re: "bent" spring perch	jomentum	12/05/08 05:45 PM
Re: "bent" spring perch	Chip	12/09/08 11:01 PM

Moderated by 4x4Wire, Dandeman, ErikB, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.462s Queries: 16 (3.459s) Memory: 0.6783 MB (Peak: 0.7186 MB) Data Comp: Off Server Time: 2026-06-20 10:06:29 UTC
Valid HTML 5 and Valid CSS