screw size

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: screw size [Re: Van] #915669 11/14/08 12:05 AM

Joined: Apr 2008

Posts: 135

Alabama USA

bamashooter Offline

Wheeler

#2 Phillips screws / 3 each--per wheel. Flat head, not round, domed type head. If you must by them long, cut them to around 5/16" and that should work. Any hardware, parts store will have them.

Entire Thread
Subject	Posted By	Posted
screw size	rhouser	11/13/08 08:11 PM
Re: screw size	Van	11/13/08 08:49 PM
Re: screw size	bamashooter	11/14/08 12:05 AM
Re: screw size	strawmyers	11/14/08 04:28 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.569s Queries: 16 (3.567s) Memory: 0.5989 MB (Peak: 0.6319 MB) Data Comp: Off Server Time: 2026-06-23 03:51:23 UTC
Valid HTML 5 and Valid CSS