screw size

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: screw size [Re: rhouser] #915670 11/14/08 04:28 AM

Joined: Oct 2001

Posts: 4,016

Lafayette, IN

strawmyers Offline

Isuzu Moderator

From THIS thread.

Quote

Oh, and they are 4x8mm philips-head machine flat screws. Go get some stainless ones....... because, again, brass screws are :rainbow:

Sean Strawmyer
Back and ready to rock...... crawl.

From Indiana or surrounding states and interested in wheelin'? Check out www.mwior.com

Entire Thread
Subject	Posted By	Posted
screw size	rhouser	11/13/08 08:11 PM
Re: screw size	Van	11/13/08 08:49 PM
Re: screw size	bamashooter	11/14/08 12:05 AM
Re: screw size	strawmyers	11/14/08 04:28 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.476s Queries: 16 (3.474s) Memory: 0.5995 MB (Peak: 0.6325 MB) Data Comp: Off Server Time: 2026-06-23 18:06:18 UTC
Valid HTML 5 and Valid CSS