89 3.0 Raider needs ECU and some others

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 89 3.0 Raider needs ECU and some others [Re: bearingman] #916128 12/02/08 09:42 PM

Joined: May 2007

Posts: 4,628

Buford, Georgia

hazy_daze

Roll Me Over

You don't want that bolt. Go to the Dodge dealer and get P/N's 1101A022 Bolt & MR994412 Washer. Those are the most current iterations of the updated bolt and washer.

Fasteddy's advice is occasionally sound...

Entire Thread
Subject	Posted By	Posted
89 3.0 Raider needs ECU and some others	jrowe	11/16/08 07:50 PM
Re: 89 3.0 Raider needs ECU and some others	rxinhed	11/17/08 04:30 AM
Re: 89 3.0 Raider needs ECU and some others	jrowe	11/18/08 07:12 AM
Re: 89 3.0 Raider needs ECU and some others	CwnAnwyn	11/18/08 05:32 PM
Re: 89 3.0 Raider needs ECU and some others	bearingman	12/02/08 08:30 PM
Re: 89 3.0 Raider needs ECU and some others	hazy_daze	12/02/08 09:42 PM
Re: 89 3.0 Raider needs ECU and some others	rxinhed	11/18/08 05:33 PM

Moderated by 4x4Wire, code33, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.464s Queries: 16 (3.462s) Memory: 0.6045 MB (Peak: 0.6375 MB) Data Comp: Off Server Time: 2026-06-15 12:51:31 UTC
Valid HTML 5 and Valid CSS