Fuel injector leaking after reassembly

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Fuel injector leaking after reassembly [Re: kewlynx] #916204 11/17/08 05:59 AM

Joined: Feb 2004

Posts: 164

Santa Barbara, CA

Chunky

Wheeler

I didn't lube them at all. Are the o-rings messed up? They came with a new set from RC when I got them cleaned. My gasket kit I got also has some. Should I swap out them o rings or do you think they should still be ok? I pulled them a couple years ago and didn't have a problem, but they must have been still lubed with gas.

----------------------
'87 4Runner

Entire Thread
Subject	Posted By	Posted
Fuel injector leaking after reassembly	Chunky	11/17/08 03:53 AM
Re: Fuel injector leaking after reassembly	kewlynx	11/17/08 05:31 AM
Re: Fuel injector leaking after reassembly	Chunky	11/17/08 05:59 AM
Re: Fuel injector leaking after reassembly	kewlynx	11/17/08 06:50 AM
Re: Fuel injector leaking after reassembly	Adam F	11/17/08 10:37 AM
Re: Fuel injector leaking after reassembly	Chunky	11/18/08 05:20 AM
Re: Fuel injector leaking after reassembly	Staceman	11/25/08 03:19 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.815s Queries: 16 (3.813s) Memory: 0.6056 MB (Peak: 0.6386 MB) Data Comp: Off Server Time: 2026-07-15 10:40:57 UTC
Valid HTML 5 and Valid CSS