Fuel injector leaking after reassembly

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Fuel injector leaking after reassembly [Re: Chunky] #916208 11/25/08 03:19 PM

Joined: Sep 2003

Posts: 1,686

Phoenix, Az

Staceman

Body Damage is Cool

I had this issue with the connectors to the injectors were pulled too tight, the wires and clips were actually pulling the injectors out of whack. Make sure the harness for the injectors lay down nice and easy, you should be good.

85 4Runner - With NEW Marlin 4.7 Gears!! It's a whole new beast!

Entire Thread
Subject	Posted By	Posted
Fuel injector leaking after reassembly	Chunky	11/17/08 03:53 AM
Re: Fuel injector leaking after reassembly	kewlynx	11/17/08 05:31 AM
Re: Fuel injector leaking after reassembly	Chunky	11/17/08 05:59 AM
Re: Fuel injector leaking after reassembly	kewlynx	11/17/08 06:50 AM
Re: Fuel injector leaking after reassembly	Adam F	11/17/08 10:37 AM
Re: Fuel injector leaking after reassembly	Chunky	11/18/08 05:20 AM
Re: Fuel injector leaking after reassembly	Staceman	11/25/08 03:19 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.464s Queries: 16 (3.462s) Memory: 0.6057 MB (Peak: 0.6387 MB) Data Comp: Off Server Time: 2026-07-15 04:29:25 UTC
Valid HTML 5 and Valid CSS