Hunting the vibration

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Hunting the vibration [Re: rxinhed] #916558 12/21/08 05:09 AM

Joined: Aug 2001

Posts: 316

Calgary

bae146

Mudrunner

Unless the whole output shaft is moving. I will remove the tailshaft housing and check it out. Any idea if it is possible to get the slip shaft if it is worn?

Entire Thread
Subject	Posted By	Posted
Hunting the vibration	bae146	11/18/08 11:59 PM
Re: Hunting the vibration	redbull	11/19/08 04:58 AM
Re: Hunting the vibration	bae146	12/19/08 06:58 AM
Re: Hunting the vibration	redbull	12/19/08 07:14 AM
Re: Hunting the vibration	rxinhed	12/21/08 01:03 AM
Re: Hunting the vibration	bae146	12/21/08 05:09 AM
Re: Hunting the vibration	bae146	12/21/08 06:44 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.501s Queries: 16 (3.499s) Memory: 0.6051 MB (Peak: 0.6381 MB) Data Comp: Off Server Time: 2026-06-15 16:45:51 UTC
Valid HTML 5 and Valid CSS