Scan gauge 2?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Scan gauge 2? [Re: WunBigTacoma] #917724 11/27/08 06:17 PM

Joined: Jan 2004

Posts: 217

Sunny SoCal

humanoid

Wheeler

It might, if you look under the dash right above the right knee there should be an OBDII port which should look something like this:

Entire Thread
Subject	Posted By	Posted
Scan gauge 2?	WunBigTacoma	11/27/08 07:18 AM
Re: Scan gauge 2?	humanoid	11/27/08 06:17 PM
Re: Scan gauge 2?	Greg_Canada	11/28/08 06:39 PM
Re: Scan gauge 2?	WunBigTacoma	11/28/08 08:13 PM
Re: Scan gauge 2?	humanoid	11/29/08 10:11 AM
Re: Scan gauge 2?	EnolaGaia	12/02/08 04:25 PM

Moderated by 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.502s Queries: 16 (3.500s) Memory: 0.6031 MB (Peak: 0.6360 MB) Data Comp: Off Server Time: 2026-06-04 15:54:31 UTC
Valid HTML 5 and Valid CSS