R/H cv shaft

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

R/H cv shaft #917941 11/29/08 05:40 AM

Joined: Aug 2001

Posts: 316

Calgary

bae146

Mudrunner

So I was under the paj, greasing it tonight, and I looked at the cv shafts and I noticed the outer boot, inner clamp had come loose. So I gave the boot a squeeze and I found a source of rusty water. <img src="/forums/images/graemlins/barf.gif" alt="" /> So do the shafts from a 92 montero fit a gen 2 paj? Any favorite inexpensive suppliers?

Entire Thread
Subject	Posted By	Posted
R/H cv shaft	bae146	11/29/08 05:40 AM
Re: R/H cv shaft	torquemonster	11/29/08 12:00 PM
Re: R/H cv shaft	bae146	11/30/08 06:01 AM
Re: R/H cv shaft	torquemonster	11/30/08 11:46 AM
Re: R/H cv shaft	redbull	12/02/08 12:28 AM
Re: R/H cv shaft	torquemonster	12/02/08 03:56 AM
Re: R/H cv shaft	bae146	12/02/08 05:07 AM
Re: R/H cv shaft	torquemonster	12/02/08 05:49 AM
Re: R/H cv shaft	jfarsang	12/04/08 05:20 PM
Re: R/H cv shaft	bae146	12/04/08 11:43 PM
Re: R/H cv shaft	redbull	11/30/08 05:05 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.501s Queries: 15 (3.499s) Memory: 0.6148 MB (Peak: 0.6478 MB) Data Comp: Off Server Time: 2026-06-20 08:19:29 UTC
Valid HTML 5 and Valid CSS