engine removal on '98 3.2 rodeo

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

engine removal on '98 3.2 rodeo #917982 11/29/08 09:41 PM

Joined: Dec 2004

Posts: 18

sawask

Need a Spot

we have the cherry picker in place, it appears that everything is disconnected, but the engine is binding on something and will not come fwd enough to tip and finish. It appears to be hitting the front dif with the oil pan, and binding on the fire wall. The auto trans is still attached to the engine, the t'fer case has been removed.

Any suggestions or help will be appreciated.

Tom

Entire Thread
Subject	Posted By	Posted
engine removal on '98 3.2 rodeo	sawask	11/29/08 09:41 PM
Re: engine removal on '98 3.2 rodeo	mlclark	11/29/08 10:20 PM
Re: engine removal on '98 3.2 rodeo	JLEMOND	11/29/08 10:45 PM
Re: engine removal on '98 3.2 rodeo	sawask	11/30/08 05:57 AM
Re: engine removal on '98 3.2 rodeo	NATO308	12/13/08 08:54 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.613s Queries: 15 (3.611s) Memory: 0.6001 MB (Peak: 0.6331 MB) Data Comp: Off Server Time: 2026-07-16 09:14:17 UTC
Valid HTML 5 and Valid CSS