engine removal on '98 3.2 rodeo

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: engine removal on '98 3.2 rodeo [Re: sawask] #917983 11/29/08 10:20 PM

Joined: Apr 2000

Posts: 7,268

Ventura County

mlclark

Isuzu Moderator

Remove the front axle?
Drop the trans?

I don't think it will come out with the trans attached. It may not come out even then, without dropping the front axle housing. Just unbolt the 4 bolts holding the housing onto the frame. It will then drop down a bit.

Good Luck,
Michael

Entire Thread
Subject	Posted By	Posted
engine removal on '98 3.2 rodeo	sawask	11/29/08 09:41 PM
Re: engine removal on '98 3.2 rodeo	mlclark	11/29/08 10:20 PM
Re: engine removal on '98 3.2 rodeo	JLEMOND	11/29/08 10:45 PM
Re: engine removal on '98 3.2 rodeo	sawask	11/30/08 05:57 AM
Re: engine removal on '98 3.2 rodeo	NATO308	12/13/08 08:54 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.477s Queries: 16 (3.475s) Memory: 0.6012 MB (Peak: 0.6342 MB) Data Comp: Off Server Time: 2026-07-14 21:03:14 UTC
Valid HTML 5 and Valid CSS