Qiuck solid axle spring perch to spring question.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Qiuck solid axle spring perch to spring question. [Re: McQ] #920278 12/13/08 03:48 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Often there are multiple holes drilled in one perch or the other. You should use the center hole on both perches to keep the axle straight. Often folks re-drill the perches to move the axle forward or back as needed, but in that case both holes need to align with each other relative to the axle tube.

[Linked Image]

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
Qiuck solid axle spring perch to spring question.	McQ	12/13/08 03:12 AM
Re: Qiuck solid axle spring perch to spring question.	4Crawler	12/13/08 03:48 AM
Re: Qiuck solid axle spring perch to spring question.	McQ	12/13/08 04:04 AM
Re: Qiuck solid axle spring perch to spring question.	4Crawler	12/13/08 04:12 AM
Re: Qiuck solid axle spring perch to spring question.	McQ	12/13/08 08:22 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.492s Queries: 16 (3.490s) Memory: 0.6038 MB (Peak: 0.6367 MB) Data Comp: Off Server Time: 2026-06-09 01:22:38 UTC
Valid HTML 5 and Valid CSS