Qiuck solid axle spring perch to spring question.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Qiuck solid axle spring perch to spring question. [Re: 4Crawler] #920279 12/13/08 04:04 AM

Joined: Apr 2007

Posts: 22

Wataga, IL

McQ

Need a Spot

These appear to be sock set ups, each with one hole. Passengers is centered. Driver's is slid backward to the rear of the perch.

So offset must not be proper. I'll slide the driver's side forward centering it with the center of the tube,(like the passenger's side) ignoring the hole in that perch on the driver's side.

Thanks for the help !!

McQ

http://www.youtube.com/watch?v=7WeACvm5X9I

Entire Thread
Subject	Posted By	Posted
Qiuck solid axle spring perch to spring question.	McQ	12/13/08 03:12 AM
Re: Qiuck solid axle spring perch to spring question.	4Crawler	12/13/08 03:48 AM
Re: Qiuck solid axle spring perch to spring question.	McQ	12/13/08 04:04 AM
Re: Qiuck solid axle spring perch to spring question.	4Crawler	12/13/08 04:12 AM
Re: Qiuck solid axle spring perch to spring question.	McQ	12/13/08 08:22 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.504s Queries: 16 (3.501s) Memory: 0.6019 MB (Peak: 0.6349 MB) Data Comp: Off Server Time: 2026-06-16 18:58:18 UTC
Valid HTML 5 and Valid CSS