Sorry about the delay in posting up pics. I've been busy w/ xmas and all.

It's a Spillmaster (purchased at walmart) cup console w cd holder. There are 2 cup holders and a section for CD's (or whatever you want to put in there).

I cut a section off the lower part in the rear that matches the floor's contour and mounted the unit on the tunnel just behind the center glove box.

It can hold 2 cups of varied sizes nicely & a bunch of CD's. It comes in a medium gray, black and tan. It will only cost a few dollars at your local pep boys, or Walmart.


Sorry about the lousy pic but my rear seat is currently folded up so I could only take the shot above from the floor level in the rear footwell area. This is the view of it from the passenger side rear footwell.

Updated Pics
Here are a couple more pics.

I used a flat tipped soldering iron to melt/cut the excess plastic away so that it would fit the contour of the rear footwell area especially since my 2 door doesn't have a 3 row rear seat (no center belt). In this picture you can see the carpet where the plastic should have been in the CD tray along with a bead of melted plastic I didn't bother trimming off and cleaning up...


Here's a pic like the first one but from the driver side.


HTH. <img src="/forums/images/graemlins/kewl.gif" alt="" />