Chad,

I'll check on the condition of the sunvisors tomorrow. There are no differences between the parts. As you say, the 2-door dark grey is like hens teeth.

R-

I need a radio surround preferably brown but not necessary, double din.

Russell, received the parts thanks.

I'm looking for V6 calipers, caliper bracket, rotors and dust shield in good shape. Let me know how much.

Thanks,

Nick

PM me.

Some parts updates:

1. Chrome headlight surrounds, $30/set
2. Good trail hood (black, a few small dents), $25
3. Three (3) sets of front door with ok to great sheetmetal: black, silver, or burgundy $10/each
4. Rear doors with wiper motor and glass: burgundy or aqua, $40/each
5. Tan dashboard (1989 to 1991), $10
6. Dark grey interior parts: seats, door panels, carpet, worn. Make offer or free for pickup
7. Windshield weatherseal from newer cracked window, $50
8. Burgundy fenders with minor rust in the lower rear corners, $40/set
9. Rear passenger doors (2 left, 1 right) with power window motors and glass, $15 each
10. Rear side glass for 4-door, $5/each
11. 4-cyl Raider grille, $40
12. 4-door fuel tank minus pump and no dents, $100
13. Aqua front clip (fenders, hood, lower valance) in good condition, no rust, $125
14. 4-cyl right front spindle assembly, $50

I have a DeWalt demolition saw and I'm not afraid to cut up sheet metal for rust repair replacement panels.

Price negotiable and shipping estimates can be provided.

Russell

The aqua Monty is just about done. I have 4 major things to pull before the carcass is gone. The V6 5-speed is still available, for example. Rear coil springs, and other pieces remain, too.

Top. <img src="/forums/images/graemlins/kewl.gif" alt="" />

Aqua Monty is deemed dead now. I have all the big pieces off. There was someone looking for a wire loom, you never got back to me.

Bob (87_Montero), I will be shipping the rust repair panel tomorrow.

R-

Russ, any chance of me being able to con you out of atleast a front set of 4.625 gears maybe a rear? V6 of course

Well, if you were able to, I'd be looking to ship the entire front assembly and rear third member...less disassembly and mess for me. Second, you'd have to be able to talk Tag out of the automatic front end I have for him. <img src="/forums/images/graemlins/wink.gif" alt="" />

Bummer, I really dont wanna have to pay to ship a whole 3rd member all the way across the country.