99 Amigo....4WD flashes, but does not engage ?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 99 Amigo....4WD flashes, but does not engage ? [Re: pu12en12g] #921483 12/20/08 07:48 PM

Joined: Dec 1999

Posts: 2,385

Little Falls, NJ

Chris Perosi Offline

Isuzu Staffer Emeritus

Sounds like a vacuum problem. Check the "Vacuum Actuator Override" article on the Isuzu Main Page -- the steps outlined there would walk you through the troubleshooting...

Is it a fast flash or a slow flash? IIRC the slow flash was "trying to engage" whereas the fast flash indicated a problem of some kind that won't let it engage...

Chris Perosi
Isuzu Editor Emeritus
OutdoorWire, Inc.

Entire Thread
Subject	Posted By	Posted
99 Amigo....4WD flashes, but does not engage ?	pu12en12g	12/19/08 08:01 AM
Re: 99 Amigo....4WD flashes, but does not engage ?	Chris Perosi	12/20/08 07:48 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.480s Queries: 16 (3.478s) Memory: 0.5948 MB (Peak: 0.6278 MB) Data Comp: Off Server Time: 2026-06-06 11:10:56 UTC
Valid HTML 5 and Valid CSS