IFS steering knuckle bushing replacement

Print Thread

Rate Thread

Re: IFS steering knuckle bushing replacement [Re: MAC] #921566 01/23/09 02:15 AM

Joined: Oct 2007

Posts: 77

Southern Ore.

yota4runna Offline

Getting the Wheeling Fever

Since you have spare spindles and you want to change the lower ball joints anyway, why not just swap them out? If you have spare axles as well, you can use the axles to check the clearances on the spare spindle's bushings. Those bushings are usually trouble free unless they've been through a lot of axle-deep mud. I'd just swap them and use your lube tool on them.

Entire Thread
Subject	Posted By	Posted
IFS steering knuckle bushing replacement	MAC	12/20/08 03:39 AM
Re: IFS steering knuckle bushing replacement	OOP'S	12/21/08 04:46 AM
Re: IFS steering knuckle bushing replacement	MAC	12/22/08 12:15 AM
Re: IFS steering knuckle bushing replacement	OOP'S	12/22/08 07:05 AM
Re: IFS steering knuckle bushing replacement	MAC	01/22/09 04:34 AM
Re: IFS steering knuckle bushing replacement	OOP'S	01/22/09 06:13 AM
Re: IFS steering knuckle bushing replacement	yota4runna	01/22/09 08:46 PM
Re: IFS steering knuckle bushing replacement	MAC	01/22/09 10:57 PM
Re: IFS steering knuckle bushing replacement	yota4runna	01/23/09 02:15 AM
Re: IFS steering knuckle bushing replacement	Vanishing_Point	01/23/09 03:31 AM
Re: IFS steering knuckle bushing replacement	OOP'S	01/23/09 04:39 AM
Re: IFS steering knuckle bushing replacement	OutlawMike	01/23/09 06:08 PM
Re: IFS steering knuckle bushing replacement	MAC	01/25/09 03:20 AM
Re: IFS steering knuckle bushing replacement	OOP'S	01/25/09 04:54 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: